As technology advances, wall-mounted televisions are becoming more and more popular in Irish homes. But with this sleek and modern look comes the challenge of hiding unsightly cables. Fear not! Hiding those cords can be a simple and creative process that will enhance the beauty of your wall-mounted TV.
With these easy step-by-step instructions, you’ll be able to conceal cables and create a clean, polished look that will be the envy of your friends and family. So grab a drill, some cable covers, and let’s get started!
Perform safety inspection and label the wall:
Before beginning any wall-mounted TV project, it’s important to perform a safety inspection. Check the wall for any electrical wires or pipes and label them accordingly. This will help you avoid any potential hazards during the installation process.
Inspect the socket area and measure cable length:
Take a look at the socket area behind your TV and measure the length of the cables you’ll need to hide. This will help you determine the best locations for the wire ports and the amount of cable you’ll need to purchase.
Determine the locations for the wire ports:
Decide where you want to place the wire ports. It’s best to place them near the socket area or in a location that is easily accessible but not visible from the front of the TV.
Get ready to mount the wall plate:
Choose a wall plate that matches the style of your wall-mounted TV. Make sure it fits the dimensions of the cable ports you’ll be using and has the necessary openings for the cables.
Make cuts for the entry and exit holes:
Using a drill, make cuts for the entry and exit holes in the wall where the cables will be entering and exiting. The holes should be large enough to accommodate the cables and the wall plate.
Remove the connections of the wires from the television:
Before mounting the wall plate, you’ll need to remove the connections of the wires from the television. This will give you access to the cables and allow you to run them behind the wall.
Attach the face plates:
Mount the wall plate onto the wall by securing it with screws. Make sure it’s level and properly aligned with the entry and exit holes.
Run the wires behind the wall and secure them in place:
Run the cables behind the wall and secure them in place with cable ties or clips. This will prevent them from getting tangled or falling down the wall.
Insert the cable behind the wall:
Push the cables through the entry and exit holes and into the wire ports. Make sure they are securely in place and that the connections are tight.
FINISH-UP:
Finally, connect the cables back to your TV and tidy up any excess cable that may be visible. You should now have a clean, polished look with all cables hidden from sight. Congratulations, you have successfully completed your wall-mounted TV cable hiding project!
Conclusion
To sum up, hiding cables on a wall-mounted TV is a simple and creative process that can be achieved with a few basic tools and a little bit of patience. With the step-by-step instructions provided, you now have the knowledge and confidence to transform the look of your TV area.
Not only will your wall-mounted TV look sleek and modern, but it will also be safer, with all cables hidden from sight and out of reach. So go ahead and give it a try! You’ll be amazed at the difference it can make in the appearance of your home. Happy hiding!
Read more of our TV guides !